Tether Mount for Family Vehicles - E-Z-ON Products, Inc. of Florida

Check your vehicle manual for tether location and weight limits to use the E-Z-ON Tether Mount. Unless noted, vehicle anchors can secure the E-Z-ON Tether Mount with passengers weighing 20-80 lbs. Locate your vehicle anchor. ‘99 vehicle models and newer have factory installed tether anchors.
Secure the 2 snap hooks to the vest at the passenger’s shoulders. Attach the single tether hook to the anchor bracket and adjust.
Adjust the tether length by pulling the web end through the tilt-lock adjuster. Lift the tilt lock to create slack in the webbing. The vest should fit the passenger snug and the tether adjusted without slack.

When your passenger exceeds your tether anchor weight limit, it is necessary to replace the factory installed tether anchor with your E-Z-ON hardware kit included. This kit is also for vehicles without a factory installed tether anchor. This secures passengers up to 168 lbs.
Attach snap hooks to D-rings or metal adjuster slots.

E-Z-ON Tether Mount must be used with a vehicle belt. Lap and shoulder belts can be used with the Tether Mount with a locking clip. See our accessories page. Securing the tether to the metal slots on the vest provides the upper body support, without using the shoulder belt.
E-Z-ON Tether Mount may be used on certain captain chairs only with E-Z-ON Vests.

Backtrack:
Home

Tether Mount

E-Z-ON Tether Mountfor Family Vehicles