1-800-323-6598

ITEM# 543 - KID CAM

  • School Bus use only
  • Transforms school bus seats with a lap belts to 5-point securements.
  • Grows with the passenger through the never-ending growth spurts.
  • Small enough to fit into a backpack, easy to move from one bus to another
  • Dynamically tested for passengers 31 – 168lbs.
  • No Mount Needed
  • One size fits most.
  • Multiple adjustment points to ensure best fit

  1. Unlock the bus seat and lift up.

  2. Wrap gray strap around bus seat back. Rest black shoulder straps on front of seat. Allow crotch straps to rest on seat.

  3. Close and lock the bus seat.

  4. Place Y-bridge on the seat top.

  5. Lower flat bracket over back of bus seat and attach the snap hook onto the flat bracket.

  6. Press the spring lock.

  7. Pull gray webbing end snug. SECURING THE PASSENGER

  8. Place belt straps over each shoulder.

  9. Locate crotch strap in the center of passenger’s legs.

  10. Feed seat belt through the first shoulder strap loop, and then through the crotch strap loop.

  11. Feed seat belt through second shoulder strap loop.

  12. Buckle lap belt low and snug across lap, reducing any slack. ADJUSTING SHOULDER STRAPS

  13. Press the spring-locks on each vest adjuster pulling loose end of the webbing to lengthen or shorten. * Keep both adjusters same height on shoulders of passenger.

  14. Connect chest clip. * Adjust to arm pit level. ADJUSTING CROTCH STRAPS

  15. Press spring-lock adjuster behind seat and pull black webbing end to shorten or lengthen. * Adjust crotch strap snug but not too tight.

  16. Use velcro tab to control excess webbing.

DOWNLOAD INSTRUCTIONS

Washing Instructions

Cold water only.  Hand or Machine wash on delicate cycle.  Use a mild detergent such as woolite.  Do not Machine Dry.  IMPORTANT: DO NOT USE BLEACH OR DRY-CLEANING PRODUCTS.

Warranty

EZ-ON Products Stands behind the products we make.  Warranty covers any defects in material or workmanships under normal use during the warranty period.  We will repair or replace product defects for 1 year from manufacturer date.

Warning

Death or serious injury can occur if manufacturer’s instructions are not followed correctly.  All EZ-ON Products are dynamically tested to meet NHTSA standards.  Please follow washing instructions on product tag.  Replace product if it is damaged, frayed or has been in a crash.  Recommended replacement after six years.  EZ-ON Products are not liable for injury if these recommendations are not followed.