- For use in a School Bus or Family Vehicle
- Small and compact making it easy to move between buses
- Must be used with EZ-ON Products Vest.
- Professional Installation required.
- For passengers weighing 31 – 168lbs.
Have a professional install the two tether hardware kits at the base of the seat approximately shoulder
*Instructions for mounting hardware are in the bag of hardware.
Attach (2) Tether hooks which have the burgundy and black straps coming from it, to the installed tether hardware kits.
Place the black straps over the top of the seat.
Put the burgundy colored hip straps through the opening where the seat back and seat bottom meet.
With passenger properly seated (hips low against beck of seat and shoulders flush to seat) attach the tether hooks to the hip level D-rings.
*Passenger must have a properly fitted vest with all closures secure. See Vest manufacturer instructions for proper fit.
Adjust the length of the hip straps first, by pulling on the excess webbing. So, they are snug and without any slack.
From the top of the seat take the 2 tether hooks and fasten them to the tether slots in the shoulder adjusters.
Adjust the shoulder straps by pulling on the excess webbing at adjuster to remove any slack.
*Passenger should not be able to move their bottom
more than 2” in any direction.